Eton G2 owner manual Battery Power Supply, Charging the Lithium battery

G2 REPORTER OWNER’S MANUAL

BATTERY POWER SUPPLY

Before initial use, open the battery compartment (behind the back stand), make sure the lithium battery is installed.

Charging the Lithium battery

To charge the battery, connect the unit to the mini-USB port and opposite end to a power source (5V DC/500mA). While charging, the battery symbol shown on the display ““ moves from right to left, and stops when the battery is fully charged.

USB Jack

A computer with a USB jack can also be used as a power source to charge the battery.

NOTE: 1. Turn off the radio while charging the battery to avoid interference.

2.After fully charging the battery, first disconnect the USB cable before turning on the radio.

3.Prior to first use, fully charge and drain the battery three times to extend the battery’s life.

6