Tuner operations
Tuner operations are mainly done from the remote control.
When you have selected “FM” or “AM” by using SOURCE SELECTOR on the front panel, press FM or AM on the remote control to use the remote control for tuner operations.
When operating the receiver using the remote control, set the mode selector to “AUDIO/TV/VCR/DBS.”
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. 9 kHz interval spacing is the initial setting.
•Be sure the receiver is turned off, but is plugged into an AC outlet when setting the AM tuner interval.
On the front panel ONLY:
To select the 10 kHz interval:
Hold down ADJUST and press STANDBY/ON. “10k STEP” appears on the display.
To change back to the 9 kHz interval:
Hold down SETTING and press STANDBY/ON. “9k STEP” appears on the display.
NOTE
When you change the AM tuner interval spacing, stored preset stations are erased. In this case, restore stations.
Tuning in to stations manually
From the remote control ONLY:
1Press FM or AM.
The last received station of the selected band is tuned in.
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | ||||||
LPCM | L | C | R |
| PL | ATT | ||
DOLBY D | S . WFR LFE | NEO : 6 | HP | |||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | ||||||
96 / 24 | AUTO SR | kHz | ||||||
|
|
|
|
|
|
|
|
2Press repeatedly or hold TUNING 9 or
(TUNING until the station you want is tuned in.
•Pressing (or holding) TUNING 9 increases the frequency.
•Pressing (or holding) (TUNING decreases the frequency.
NOTES
•When you hold and release TUNING 9 or ( TUNING, the frequency keeps changing until a station is tuned in.
•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
•When an FM stereo program is received, the ST (stereo) indicator also lights up.
Using preset tuning
Once a station is assigned a channel number, the station can be quickly tuned simply by selecting the number. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
From the remote control ONLY:
1 Tune in to the station you want to preset (see |
| |||||||||
operations | ||||||||||
“Tuning in to stations manually” above). | ||||||||||
| ||||||||||
• If you want to store the FM reception mode for this station, |
| |||||||||
| select the FM reception mode you want. See “Selecting the |
| ||||||||
| FM reception mode” on page 24. |
|
|
| ||||||
|
|
|
|
|
|
| Tuner | |||
| 96 / 24 | LS SB RS | AUTO SR | kHz |
| |||||
| EQ C.TONE | VIRTUAL SB AUDIO P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE |
|
| ||||||
| LPCM | L | C R | PL | ATT |
|
| |||
| DOLBY D | S . | WFR | LFE | NEO : 6 | HP |
|
| ||
| DTS AAC |
|
|
|
| DSP 3D | MHz |
|
| |
|
|
|
|
|
|
|
|
|
|
2Press MEMORY.
The channel number position starts flashing on the display for about 5 seconds.
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | ||||||
LPCM | L | C | R |
| PL | ATT | ||
DOLBY D | S . WFR LFE | NEO : 6 | HP | |||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | ||||||
96 / 24 | AUTO SR | kHz | ||||||
|
|
|
|
|
|
|
|
CONTINUED ON THE NEXT PAGE
23