JVC RX-E11S Sound adjustments, Basic adjustment items, Operating procedure, On the front panel

Sound adjustments

Sound adjustments

You can make sound adjustment to your preference after completing basic setting.

Basic adjustment items

You can adjust the following items. See pages in parentheses for details.

•You cannot select the items which is not available with the current setting.

Items	To do
SUBWFR LVL	Adjust the subwoofer output level. (21)
FRONT L LVL*	Adjust the left front speaker output level.
	(21)
FRONT R LVL*	Adjust the right front speaker output level.
	(21)
CENTER LVL*	Adjust the center speaker output level. (21)
SURR L LVL*	Adjust the left surround speaker output level.
	(21)
SURR R LVL*	Adjust the right surround speaker output
	level. (21)
EFFECT	Adjust the effect level. (21)
PANORAMA	Add “wraparound” sound effect with side-
	wall image. (21)
BASS BOOST	Boost the bass level. (22)
INPUT ATT	Attenuate the input level of analog source.
	(22)
CENTER TONE	Make the center tone soft or sharp. (21)
D EQ 63Hz	Adjust the equalization pattern of each
D EQ 250Hz	band. (22)
D EQ 1kHz
D EQ 4kHz
D EQ 16kHz
SBWFR PHASE	Select the subwoofer sound phase. (22)

*If you have used Smart Surround Setup on page 14, these settings are not required.

You can also use the remote control for sound adjustment except for “PANORAMA,” “INPUT ATT,” and “SBWFR PHASE.”

Operating procedure

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex.: When adjusting subwoofer output level.

1Press ADJUST.

MULTI JOG now works for the sound adjustment.

2Turn MULTI JOG until the item you want to adjust appears on the display.

•As you turn MULTI JOG, the adjustment items change as follows:

EQ C.TONE VIRTUAL SB AUDIO P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE

LPCM	L	C	R	PL	ATT
DOLBY D	S .	WFR	LFE	NEO : 6	HP
DTS AAC				DSP 3D	MHz
	LS	SB	RS
96 / 24				AUTO SR	kHz

SUBWFR LVL	FRONT L LVL
FRONT R LVL	CENTER LVL
SURR L LVL	SURR R LVL
EFFECT	PANORAMA
BASS BOOST	INPUT ATT
CENTER TONE	D EQ 63Hz
D EQ 250Hz	D EQ 1kHz
D EQ 4kHz	D EQ 16kHz
SBWFR PHASE	(Back to the beginning)

•The items which is not available with the current setting will be skipped.

3Press SET.

The current setting for the selected item appears.

EQ C.TONE		VIRTUAL SB AUDIO P. BASS			TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
LPCM	L	C	R	PL	ATT
DOLBY D	S . WFR LFE			NEO : 6	HP
DTS AAC				DSP 3D	MHz
	LS	SB	RS
96 / 24				AUTO SR	kHz

4Turn MULTI JOG to adjust the selected item.

EQ C.TONE		VIRTUAL SB AUDIO P. BASS			TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
LPCM	L	C	R	PL	ATT
DOLBY D	S . WFR LFE			NEO : 6	HP
DTS AAC				DSP 3D	MHz
	LS	SB	RS
96 / 24				AUTO SR	kHz

–10 0+10

Your adjustment is stored.

5Press SET.

6Repeat steps 2 to 5 to adjust other items if necessary.

20