Operating other JVC products
Operating other
JVC products
You can use the supplied remote control to operate not only the receiver but also other JVC products.
•Refer also to the manuals supplied with the other products.
–Some JVC VCRs can accept two types of the control
–Some JVC DVD recorders can accept four types of the control signals. This remote control can operate a DVD recorder whose remote control code is set to the initial code. For details, refer to the manual supplied with the DVD recorder.
•To operate other products, aim the remote control directly at the remote sensor on the target product.
7 TV |
Set the mode selector to |
“AUDIO/TV/VCR/DBS.” |
You can always perform the following operations:
TV : | Turn on or off the TV. |
TV VOL
TV/VIDEO: Change the input mode (either video input or TV tuner) on the TV.
After pressing TV, you can perform the following operations on the TV.
CHANNEL
1 – 9, 0, 100+: Select the channel numbers.
TV RETURN (10): Function as the TV RETURN button.
7VCR
Set the mode selector to |
“AUDIO/TV/VCR/DBS.” |
You can always perform the following operation:
VCR : | Turn on or off the VCR. |
After pressing VCR, you can perform the following operations on the VCR.
CHANNEL | Change the channel numbers on the VCR. |
1 – 9, 0: | Select the channel numbers on the VCR. |
|
|
3: | Start playback. |
|
|
7: | Stop playback. |
|
|
8: | Pause playback. To release it, press 3. |
|
|
¡: | |
|
|
1: | Rewind a tape. |
|
|
REC PAUSE: | Enter recording pause. To start recording, |
| press this button then 3. |
|
|
32
