Basic settings
Setting the virtual surround back
You can enjoy the surround back channel while playing back Dolby Digital Surround EX software or
Select “V SB : ON” when activating the Virtual Surround Back.
V SB : OFF Select to deactivate the Virtual Surround Back.
V SB : ON While you play Dolby Digital Surround EX software or
Initial setting: V SB : OFF
NOTES
•When “SURRND SPK” is set to “NO” (see page 16), this function is not available.
•While playing back
•Virtual Surround Back may not be applied to some software.
Selecting the main or sub channel
You can select the playback sound (channel) you want while playing digital software recorded (or broadcast) in Dual Mono mode (see page 26), which includes two monaural channels separately.
D MONO: SUB Select to play back the
D MONO:MAIN Select to play back the main channel (Ch 1).* Signal indicator “L” lights up while playing back this channel.
D MONO: ALL Select to play back both the main and sub-
channels (Ch 1/Ch 2).*
Signal indicators “L” and “R” light up while playing back these channels.
Initial setting: D MONO:MAIN
*Dual Mono signals can be heard from the following
| Without |
|
|
| With Surround Activated |
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||
Dual Mono |
|
|
| Center speaker setting |
| |||||||
Surround |
|
|
|
| ||||||||
setting |
|
|
| SML/LRG |
|
|
| NO |
| |||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| L | R |
| L | C |
| R | L |
| R | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
SUB | Ch 2 | Ch 2 |
|
|
| Ch 2 |
|
|
| Ch 2 |
| Ch 2 |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
MAIN | Ch 1 | Ch 1 |
|
|
| Ch 1 |
|
|
| Ch 1 |
| Ch 1 |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
| |
ALL | Ch 1 | Ch 2 |
|
|
| Ch 1+Ch 2 |
|
|
| Ch 1+Ch 2 | Ch 1+Ch 2 | |
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
The Dual Mono format is not identical with bilingual broadcasting for TV programs. So this setting does not take effect while watching such bilingual programs.
Using the Midnight mode
You can enjoy a powerful sound at night using the Midnight mode.
NIGHT :OFF Select when you want to enjoy surround with its full dynamic range. (No effect applied.)
NIGHT : 1 Select when you want to reduce the dynamic range a little.
NIGHT : 2 Select when you want to apply the compression effect fully (useful at night).
Initial setting: NIGHT :OFF
From the remote control:
Press SOUND, then press MIDNIGHT repeatedly to select either one of above.
NOTE
After pressing SOUND, the numeric buttons work for sound adjustments. To use the numeric buttons to operate your target source, press the corresponding source selecting button before operation; otherwise, the remote control may not work as you intend.
18