Basic operations
When operating the receiver |
using the remote control, set |
the mode selector to |
“AUDIO/TV/VCR/DBS.” |
Adjusting the subwoofer audio position
If the subwoofer sound is reinforced for stereo sound compared to the sound reproduced with
The AUDIO P. indicator lights up when this function is activated.
•Once you have made an adjustment, it is memorized for each source.
From the remote control ONLY:
Press SOUND, then press A.POSITION repeatedly.
•Each time you press A.POSITION, the subwoofer audio position level changes as follows:
AUDIO P. indicator
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | |||||||
LPCM | L | C | R |
| PL | ATT | |||
DOLBY D | S . WFR LFE | NEO : 6 | HP | ||||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | ||
LS | SB | RS | |||||||
96 / 24 | AUTO SR | kHz | |||||||
|
|
|
|
|
|
|
|
|
OFF (canceled)
The smaller the number becomes, the more the level decreases
automatically when listening in stereo.
•If no adjustment is required, select “OFF” (initial setting).
NOTES
•The maximum subwoofer output level is
Ex.: When setting the subwoofer output level to
To adjust the subwoofer output level, see page 21.
•This function is not available when the Surround/DSP mode is activated.
•After pressing SOUND, the numeric buttons work for sound adjustments. To use the numeric buttons to operate your target source, press the corresponding source selecting button before operation; otherwise, the remote control may not work as you intend.
Turning off the sounds temporarily
From the remote control ONLY:
Press MUTING to turn off the sound through all connected speakers and headphones connected.
“MUTING” appears on the display and the volume turns off.
EQ C.TONE | VIRTUAL SB AUDIO P. BASS | TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE | ||||||
LPCM | L | C | R |
| PL | ATT | ||
DOLBY D | S . WFR LFE | NEO : 6 | HP | |||||
DTS AAC |
|
|
|
|
| DSP 3D | MHz | |
LS | SB | RS | ||||||
96 / 24 | AUTO SR | kHz | ||||||
|
|
|
|
|
|
|
|
To restore the sound, press MUTING again.
•Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) also restores the sound.
Changing the display brightness
You can dim the
Press DIMMER repeatedly.
•Each time you press the button, the display brightness changes as follows:
DIMMER 1: Dims the display slightly.
DIMMER 2: Dims the display more than DIMMER 1.
DIMMER 3: Turns off the display. (Temporarily canceled when you operate the receiver.)
DIMMER OFF: Cancels the Dimmer (normal display).
12