TL-WR700N
150Mbps Wireless N Mini Pocket Router
•Channel Width - The current wireless channel width in use.
•MAC address - The physical address of the Router, as seen from the WLAN.
•WDS Status - The status of WDS connection.
System Up Time - The length of the time since the Router was last powered on or reset. Click the Refresh button to get the latest status and settings of the Router.
8.3 Quick Setup
Please refer to Section 3.2.5.
8.4 Working Mode
The Router supports five operation mode types: Router, Repeater, Bridge, Client and AP. Please select one you want. Click Save to save your choice, which is shown as Figure
Figure 8-3 Working Mode
Router - The wireless Router Mode. In this mode, the device enables
Repeater - The wireless Repeater Mode. It could extend the range of wireless network.
Bridge - The wireless Bridge Mode. It could communicate with another wireless network.
Client - The Client Mode. The computer connected by Ethernet could get access to an AP by Client mode.
AP - The wireless access point mode.
Click OK in the following screen and then the Router will reboot and to work on Client Mode.
