Vanguard Managed Solutions 7300 Series Port Configuration Menu, Coder Parameter Dynamic Coder

Vanguard 7300 Port Configuration

Node:		Address:	Date:Time:
Menu: Configure			Path:
Port Configuration
	--*Port Number: 2006
	--*Port Type: voice
	--*Access Type: Digital
	--Interface Type: E&M
	--Signaling Mode: Normal
	--Signaling Control: Immediate
	--PCM Mode: A-law
	--Compression Rate (KHz): 8GkB
	--VAD Control: Enabled
	--H.323 Dynamic Coder: Enabled
	--Smoothing Delay (msec): 70

Figure 4-8. Port Configuration Menu

H.323 Dynamic This is a description of the H.323 Dynamic Coder parameter:

Coder Parameter

H.323 Dynamic Coder

Range:	Enabled, Disabled
Default:	Enabled
Description:	Specifies whether or not advertising is used to negotiate with a
	remote H.323 device.
	•	Enabled: The H.323 interface advertises all of the coders
		supported on this device. The H.323 interface dynamically
		negotiates, with the remote H.323 device, for a coder,
		bundle format, and VAD setting. If necessary, this port is
		re-configured to match the negotiated settings.
	•	Disabled: The H.323 interface advertises only the current
		configuration (compression rate, bundle format, and VAD
		setting). Negotiations do not take place. If the remote H.323
		terminal cannot match this ports configuration, the call is
		cleared.

For more information, refer to the Vanguard Voice Manual (Part Number T0104-05).

Operating Your Vanguard 7300 4-15