Vanguard Managed Solutions 7300 Series installation manual Vanguard 7330 Version 1 Cable Channel

Removing And Replacing Vanguard 7300 Front Covers

The Vanguard 7330 The fixed right 7330 Version 1 front cover panel contains the cable channel at the

Version 1 Front bottom. All front-connected interface cables run through the channel behind the

Cable Channel fixed panel to exit on the right side of the chassis. For example, see the location of the shielded Ethernet cable in Figure 3-8.

Use the procedure in this table to remove the Vanguard 7330 fixed front cover panel and position the cables:

Step Action

1Remove the two black nuts on each side to free the panel.

2Place the cover on a flat, level surface, painted side up.

3Gather all front cables and align them neatly in the cable channel.

4Replace the front cover panel and secure it with the four nuts.

Shielded Ethernet

Cable

Figure 3-8. The Vanguard 7330 Version 1 Cable Channel

Vanguard 7300 Installation 3-13