Vanguard Managed Solutions 7300 Series Attaching a Vanguard 7300 AC Power Cord, Switch

		Attaching a Vanguard 7300 AC Power Cord
Attaching a Vanguard 7300 AC Power Cord
Introduction
		This section explains how to attach an AC Power Cord to a Vanguard 7310 or 7330.
Attaching the
		Attach the supplied power cord to the rear of the AC power supply and plug it in.
Power Cord		The Vanguard 7310 Version 1 power receptacle is on the back of the enclosure. See
		Figure 3-13.
		Power
		Switch
	Dual Earth
	Ground
		ESD Bond
		Point
		AC Power
		Receptacle
		Figure 3-13. Vanguard 7310 Version 1 - Power Connector and On/Off
		Switch
Version 1
		For the Vanguard 7330 Version 1 routers, there are two AC power cords on the back
		of the enclosure, one for each of the two AC power supplies, as shown in
		Figure 3-14.The power switch for the Vanguard 7330 is on the chassis front panel.

AC Power Cord

Receptacles

Figure 3-14. Vanguard 7330 Version 1 - Power Connectors

Vanguard 7300 Installation 3-19