Vanguard Managed Solutions 7300 Series A Sample Boot Console Display, Serial Cards

Accessing the Control Terminal Port

Figure 4-2shows a typical Vanguard 7300 CTP terminal power-up display for a Vanguard 7300 with Serial cards.

.

****************************************************

* Vanguard 7300 - Bootprom Program Loading *

*Copyright 2002

****************************************************

* BOOTPROM Revision: V1.50, Creation Date: 20-May-2002 Copyright: Copyright (C)

*Config - Requested to load alte_img

*The Current Image identifies as V6.1.R000_IP_7, 08 Feb 2002

*The Alternate Image identifies as V6.1.R000_MS_7, 06 Feb 2002

***********************************************

*Vanguard 7300 - Loading Flash Program Loader* Copyright 2002 *

*Vanguard 7330 - Diagnostics Software Loading * Copyright 2002 * 7300 Series Router Power-On Diagnostics For 8 Slot Chassis...

Executing V7300 STARTUP Diagnostics...

Loading T1/E1 Diagnostics Image to Slot[2], Please Wait <PASSED> DRAM Test:(Quick Test) (4000 -- 7000000) <<-PASSED->> Testing Motherboard Serial PMC Module <<---NA--->>

Testing Compact PCI Serial Module in Slot 3

Testing Serial Slave Internal Loopback <<-PASSED->> Testing Compact PCI Serial Module in Slot 4 Testing Serial Slave Internal Loopback <<-PASSED->> Testing Compact PCI Serial Module in Slot 5 Testing Serial Slave Internal Loopback <<-PASSED->> Testing Mezzanie Dual-Port Ethernet Card <<-PASSED->> Testing Dual-Port Ethernet Card in <<---NA--->>

Testing Raven Registers <<-PASSED->>

Testing Processor Card Ethernet Port <<-PASSED->>

Processor Card Flash Test: AMD Flash Detected <<PASSED>>

SIMM Flash Test: 8Meg-INTEL Flash Detected <<PASSED>>

Testing NVRAM <<-PASSED->>

Testing Compact Flash <<-PASSED->>

Testing T1/E1 Card in Slot[2], Please Wait <PASSED>

Exiting V7300 STARTUP Diagnostics...

************************************************

OK

************************************************

Figure 4-2. A Sample Boot Console Display, Serial Cards

Operating Your Vanguard 7300 4-5