Vanguard Managed Solutions 7300 Series installation manual Port Speed

		Vanguard 7300 Port Configuration
	Port Speed
Description
		The Port Speed value in the FRI, PPP, X.25, SDLC, and TBOP statistics screen is the
		configured Port Speed for the Vanguard 7300 Serial Port, not the actual measured
		port speed. The configured Port Speed field is circled in Figure 4-6.

Node: Tiger8	Address: 800		Date: 14-FEB-2001 Time:15:15:54
Detailed FRI Port Statistics: Port 301						Page: 1 of 6
Port Speed:	2048000	Operating Control Protocol: None			Protocol Role:
DTE
Port Status: Up		SP-Backup: Not Configured		Priority Station: 0
Data Summary:			Last Statistics Reset:
IN		OUT		IN		OUT
Characters:	430207009 57475		Characters/sec: 249460			0
Frames:	1795597	72	Frames/sec:	1041		0
Av Fr size:	239	798	Port Util.:	97%		0%

Frame-Relay / Physical Summary (FBOP):
Overrun: 0	Underrun: 0	CRC: 0	Non-Octet Aligned: 0
Frame Length Err: 0		Unknown DLCI Err: 0			Last Unknown DLCI: 0
Frame Length Err: 0		Unknown DLCI Err: 0			Last Unknown DLCI: 0
Interface Summary: V.35		DCE		INPUT			OUTPUT
			DTR RTS MB P14			DSR DCD RI CTS
State: Connected (SIMPLE)			H	H	X X	H	H X H

Figure 4-6. Configured Port Speed on FRI Port Statistics Display

Set The Clock If the Clock Source parameter in the FRI, PPP, X.25, SDLC, or TBOP serial port is

Speedset to EXT or EXTLP, the Port Speed field in the FRI, PPP, X.25, SDLC, and TBOP statistics screen might not match the speed of the actual clock on the serial line.

Caution

The Clock Speed parameter in the Port Record should be configured to the Clock Speed the port is attached to. It is important to set the correct port speed, even when set to external, because statistics, throughput, and capacities use this value in their own calculations.

Note

You can determine the actual speed on the serial line by attaching an external data scope or protocol analyzer.

Operating Your Vanguard 7300 4-11