Vanguard Managed Solutions 7300 Series installation manual Removing the Carrier Expansion Card

Removing and Replacing Carrier Expansion Cards and Mezzanine Cards (PMCs)

Removing the Carrier Expansion Card

Removing the	Use the steps in this table to remove the Carrier Expansion Card from the Vanguard
Carrier Expansion	7300 enclosure:
Card
	Step	Action

1Disconnect any cables attached to the connectors on the front of the Carrier Expansion Card.

2Begin pressing outward on the two ejector levers at the same time, then pause to wait for the blue LED on the front of the card to illuminate.

3Press the two ejector levers.

4Pull the Carrier Expansion Card from the enclosure.

Modifying Your Vanguard 7300 5-19