Vanguard Managed Solutions 7300 Series Control, Deactivate Board, Activate Board, Booting

Board Management

Control	Board Management has its own control entry: Main->Control->Board
	Management. See Figure 4-13for an example of the Board Management menu:
	Node:		Address:	Date:Time:
	Menu: Control			Path:
	Board Management
		--Deactivate Board
		--Activate Board

	Figure 4-13. Board Management menu
Deactivate Board
	When this item is selected, the CTP operator will be prompted for a board number.
	The board number is entered, and the CTP determines the status of the board and
	replies with a status of Active, Deactivate or Fault. If the status is anything other than
	active, the deactivation cannot proceed. The process of deactivating the board will
	cause the keepalive heartbeat from being confirmed or responded to by the selected
	board. The normal alarms will be generated during this procedure.
Activate Board
	When this item is selected, the CTP operator is prompted for a board number. The
	board number is entered, and the CTP determines the status of the board and replies
	with a status of Active or Deactivate. If the status is anything other than Deactivate
	or Fault, the activation cannot proceed. The operator is informed of this and
	prompted for board number. The process of activating the board causes a software
	reload and restarting of the board. The normal alarms are generated during this
	procedure.
Booting
	The Board Management Boot Record menu item brings the current configuration of
	the Board Management parameters into the running configuration and makes them
	operational. The path to the Board Management Boot record is Main->Boot->Board
	Management.

4-24 Operating Your Vanguard 7300