Vanguard Managed Solutions 7300 Series Electrical, These are the electrical specifications

Vanguard 7310 Version 1 Product Specifications

Electrical These are the electrical specifications:

•Power Factor: 0.95 W/VA.

•Inrush Current:

-35A peak at 230 VAC for one line cycle.

-35A peak at -72 VDC within 4 msec.

•Efficiency: Less than 65% at full load, 110 VAC.

•Output Power: 150 watts.

•Hold-Over Storage: 20 msec at full load, 90 VAC.

•Transient Response:

All outputs return to 1% within 1 msec of a 50% load change.

•Dynamic Load: This power supply operates properly when subjected to a 10% load delta with a 50% duty cycle, from 0 to 2 MHz.

•Over Voltage protection:

-+5V output <6.4 VDC.

-+3.3V output < 4.2 VDC.

•Short Circuit Protection:

-Latch off if any output is shorted to any other output.

-Automatic recovery upon removal of the short.

•System Ratings:

-Voltage: AC 100-120/200-240 V.

-Frequency: 60/50 Hz.

-Current: 2.5/1.25 Amps.

Cooling These are the cooling specifications:

•Four 2.40-inch (60 mm) x 1.0 (25 mm) DC axial fans in a push-pull N+1 redundant configuration.

•Cooling sensors detect airflow and temperature changes.

•Fan Speed controls.

•Forced-air ducting to the power supply, Compact PCI boards, and transition boards.

A-3