Vanguard Managed Solutions 7300 Series Installing the Ethernet PMC on the IBM750FX CPU Card

Removing and Replacing the CPU Card and CPU Mezzanine Card (PMC)

Step Action (continued)

7Position the PMC on top of the card (PMC 1 or 2) as shown in Figure 5-11.Slide the front edge connectors into the opening labelled “PMC 1 or PMC 2”.

8Press the PMC down onto the top of the CPU card. The connectors on the underside should connect smoothly with the J11/12/13/14 connectors.

9Insert the short screws at the corners of the PMC and into the standoffs on the CPU Card. Tighten the screws.

10Re-install the CPU card into PMC slot 1 on the enclosure according to the instructions provided in steps 3 to 5.

Ethernet

PMC 2

Ethernet

PMC 1

Figure 5-11. Installing the Ethernet PMC on the IBM750FX CPU Card

5-16 Modifying Your Vanguard 7300