Vanguard Managed Solutions 7300 Series Front panel, Vanguard Version 1 Front Cover Panels

Removing And Replacing Vanguard 7300 Front Covers

Removing and	Use the procedure in this table to remove and replace the 7330 Version 1 hinged
Replacing	front panel:
Vanguard 7330
Version 1 Front
Cover Panels
	Step	Action
	1	Open the 7330 hinged front cover panel (left side) and locate the two
		self-contained hinge assemblies on the left side of the chassis.
	2	Support the front cover while pushing down on the top spring-loaded
		hinge pin. Rotate the pin into its lock position.
	3	Pull up on the bottom spring-loaded hinge pin, and rotate it to its lock
		position.
	4	With the spring-loaded hinge pins clear, pull the cover forward until it is
		free.
	5	Place the cover panel on a flat level surface, painted side up.
	6	To replace the cover, line up the hinge assemblies and rotate the pins until
		they lock in place.
	7	Close the hinged cover and keep it closed except for maintenance or
		recabling.

3-12 Vanguard 7300 Installation