Vanguard Managed Solutions 7300 Series Serial Card Connector and Cable Details, Pin Signal

Serial Card Connector and Cable Details

Serial Card Connector and Cable Details

Introduction This section describes the details of the serial card connector and cable.

Cable Connector The following cable connector information applies to the Vanguard 7300 Serial Card. Pinouts for the exterior interface end of these Serial Card cables are in the following subsections:

•EIA 232 DCE

•EIA 232 DTE

•V.35/V.36 DCE

•V.35/V.36 DTE

•X.21 DCE

•X.21 DTE

•EIA 530 DCE

•EIA 530 DTE

EIA 232 DCE/DTE This is a list of the Serial Card EIA 232 DCE and DTE connector pinouts:

Pin	Signal
1	Prot Gnd
2	TD
3	RD
4	RTS
5	CTS
6	DSR
7	Signal Comm
8	DCD
9	(not used)
10	(not used)
11	(not used)
12	(not used)
13	(not used)
14	(not used)
15	TXC
16	(not used)
17	RXC
18	(not used)
19	(not used)
20	DTR
21	(not used)
22	RI (DCE Out)
23	(not used)

B-7