Vanguard Managed Solutions 7300 Series Serial Rear Transition Module, Baud-Rate, Generator

Vanguard 7300 Cards

Serial Rear Transition Module

Transition Module Each port has a dedicated connector and is independently configured and cabled. For Port Connector and each port, physical interface protocol selection is controlled by software and can be

Configuration set to EIA 232, V.35, V.36, X.21, EIA 530, or EIA530A. The port’s interface cable determines DTE/DCE.

All serial cable connections to this chassis slot are made at Transition Module ports. For node configuration, port numbering is unique to the Vanguard 7300 and is described in “Vanguard 7300 Port Configuration” section on page 4-7.

Baud-Rate	A programmable clock generator for each channel can generate all of the clock
Generator	speeds listed in the following table:
			Clock Speed (in Kbps)
	1.2	24		128	896	1664
	2.4	26.4		192	960	1728
	4.8	28.8		256	1024	1792
	7.2	32		320	1088	1856
	8	38.4		384	1152	1920
	9.6	40		448	1216	1984
	12	48		512	1280	2048
	14.4	56		576	1344	4096
	16	64		640	1408	6144
	16.8	72		704	1472	7680
	19.2	80		768	1536	8192
	21.6	96		832	1600

Note

The Serial Card does not support split-clocking mode.

Vanguard 7300 Enclosures and Components 2-35