Vanguard Managed Solutions 7300 Series installation manual Token Ring Connections

Cabling Procedures

	Token Ring Card
Cabling	All cabling for the Token Ring card is done at the front of the card as shown in
	Figure 3-29.All connections are located on the front of the card. The Token Ring
	card has two ports and each port supports only one UTP or STP connection. The
	Token Ring card can be installed in any slot other than slot 1. Either a UTP or STP
	cable can be used by connecting the cable to the appropriate port. The cable type is
	automatically selected. A standard RJ45 connector will be provided for UTP and a
	standard DB9 connector will be provided to STP cables.
	Warning
	Attaching a CTP cable to a UTP port damages the token ring card.
	STP	UTP	PORT 1	STP	UTP	PORT 2	EXT ST

Figure 3-29. Token Ring Connections

3-36 Vanguard 7300 Installation