Vanguard Managed Solutions 7300 Series installation manual Replacing the Carrier Expansion Card

Removing and Replacing Carrier Expansion Cards and Mezzanine Cards (PMCs)

Replacing the Carrier Expansion Card

Installing the When reinstalling a Carrier Expansion Card, the first Carrier Expansion card should Carrier Expansion be placed in card slot 2, the first slot beside the CPU Card. Install subsequent Carrier

Card	Expansion cards in subsequent slots.
	Use the steps in this table to install a Carrier Expansion Card in a Vanguard 7300
	enclosure:
	Step	Action
	1	Open the ejector levers.
	2	Align the Carrier Expansion Card with the card rails in the Vanguard 7300
		chassis slot.
	3	Carefully insert the Carrier Expansion Card in the card rails and slide the
		card until you feel resistance.
	4	Simultaneously press the ejector levers inward until they lock.
	5	Tighten the captive screws.
	6	Reconnect any connector cables.

5-22 Modifying Your Vanguard 7300