Vanguard Managed Solutions 7300 Series With Voice DSP, Serial Card, Token Ring Card

General Card Replacement Guidelines

T1/E1/PRI Card If you are installing the T1/E1/PRI card without a Voice Server Card into a Vanguard

7300 enclosure it is recommended that you follow these guidelines:

1)Install the first T1/E1/PRI card into the slot beside the CPU Card or, if there are Carrier Expansion cards, in the first empty slot after the Carrier Expansion Cards.

2)Install the T1/E1 Rear Transition Module at the same slot location as the T1/E1/ PRI Card.

3)Install subsequent T1/E1/PRI cards and Rear Transition Cards into subsequent slots.

T1/E1/PRI Card	If you are installing the T1/E1/PRI with Voice Server PMC into a Vanguard 7300
with Voice DSP	enclosure it is recommended that you follow these guidelines:
Card	1)	Install the first T1/E1/PRI with Voice DSP card into the slot beside the CPU
		Card or the first empty slot after any Carrier Expansion and/or after any
		T1/E1/PRI cards without a Voice Server PMC.
	2)	Install subsequent T1/E1/PRI with Voice Server PMC cards into subsequent
		slots.
Serial Card
	If you are installing the Serial Card into a Vanguard 7300 enclosure it is
	recommended that you follow these guidelines:
	1)	Install the first Serial Card into the slot beside the CPU Card or the first empty
		slot after any Carrier Expansion cards or T1/E1/PRI cards.
	2)	Install subsequent Serial Cards into subsequent slots.
Token Ring Card
	If you are installing the Token Ring Card into a Vanguard 7300 enclosure it is
	recommended that you follow these guidelines:
	Install the Token Ring Card into any slot beside the CPU Card or the first empty slot
	after any Carrier Expansion cards or T1/E1/PRI cards.
7300 Advanced
	If you are installing the Advanced Encryption Card (AEC) into a Vanguard 7300
Encryption Card	enclosure, there is a limit of one AEC card per router.

5-10 Modifying Your Vanguard 7300