Vanguard Managed Solutions 7300 Series installation manual PCI Mezzanine Card PMC, Front View

		Vanguard 7300 Cards
PCI Mezzanine Card (PMC)
Introduction
		10/100BaseT Ethernet Mezzanine Cards (PMCs)can be installed in the PMC slot on
		the CPU card and in the two PMC slots on the Carrier Expansion Card. Because a
		PMC does not require a full slot, it is mounted on a full-size card that serves as its
		host. The following full-size Vanguard 7300 cards can host PMCs:
		• CPU Card (one PMC slot)
		• Carrier Expansion Card (two PMC slots)
	Dual-port 10/100BaseT Ethernet Mezzanine Card (PMC)
Description
		The 10/100BaseT Ethernet Mezzanine Card (PMC) mounts on the CPU card and
		on the Carrier Expansion Card. This 10/100BaseT Ethernet PMC provides two
		auto-sensing ports that can switch between 10BaseT and 100BaseT, depending on
		the link data rate, to provide the highest possible 10 or 100 Mbps throughput.
		An auto-sensing port detects the speed of hubs and adapters and negotiates
		automatically for the maximum possible throughput speed. The Vanguard 7300
		Ethernet interface complies with the IEEE 802.3 for 10BaseT and 100BaseT.
Front View
		The 10/100BaseT Ethernet PMC provides two RJ45 connectors and six indicator
		LEDs on the front panel as shown in Figure 2-15:

ACT 100bT LINK

Figure 2-15. 10/100BaseT Ethernet PMC - Front View

Vanguard 7300 Enclosures and Components 2-23