Avaya P330-ML-ML manual Set port dot1x re-authperiod, P330-1super#set port dot1x re-authperiod 1/2

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-1(super)#set port dot1x re-authentication 1/2 enable port 1/2 re-authenticate was set to enable

set port dot1x re-authperiod

User level: supervisor

Use the set port dot1x re-authperiodcommand to set the the idle time between re-authentication attempts before the session is terminated.

The syntax for this command is:

set port dot1x re-authperiod <module/port> <seconds>

module/	Module and port number (or range of ports)
port
seconds	Number of seconds – 0 to 65535
Example:

P330-1(super)#set port dot1x re-authperiod 1/2 400

set port dot1x server-timeout

User level: supervisor

Use the set port dot1x server-timeoutcommand to set the time to wait for a reply from the Authentication Server before the session is terminated.

The syntax for this command is:

set port dot1x server-timeout <module/port> <seconds>

module/	Module and port number (or range of ports)
port
seconds	Number of seconds – 0 to 65535
Example:

P330-1(super)#set port dot1x server timeout 1/2 400

Avaya P330-ML Reference Guide 89