Avaya P330-ML-ML manual Clear arp-cache, Router-Nconfigure# clear arp-cache

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

The syntax for this command is:

[no] arp timeout <seconds>

seconds	The amount of time, in seconds, that an entry remains
	in the arp cache.

Example:

To set the arp timeout to one hour:

Router-N(configure)# arp timeout 3600

To restore the default arp timeout:

Router-N(configure)# no arp timeout

clear arp-cache

User level: privileged, supervisor.

If you are at the ”privileged” level, you can only access this command in

Configure mode.

Type configure at the command prompt to enter configure mode.

Use the clear arp-cachecommand to delete dynamic entries from the ARP cache and the IP route cache.

The syntax for this command is:

clear arp cache[<vlan><ip addr>[<mask>]]

vlan	VLAN string (up to 16 characters)
ip addr	IP address
mask	IP mask
Example:

Router-N(configure)# clear arp-cache

Flushing all arp entries

Flushed 100 ARP entries

Done!

Avaya P330-ML Reference Guide 213