
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Example: (by Module/Port)
|
|
show cam 1/1 |
|
Dest MAC/Route Dest | Destination Ports |
1/1 | |
1/1 | |
1/1 | |
... |
|
1/1 |
Total Matching CAM Entries Displayed = 178
show cam mac
User level: user, privileged, supervisor
Use the show cam mac command to display the module and port number where a specific MAC address was learned.
MACs associated with LAGs appear under the LAG ID, not under the LAG port.
The syntax for this command is:
show cam mac <mac-addr>
MAC address to search for. |
| ||
Example: |
|
|
|
|
| ||
|
| ||
Dest MAC/Route Dest | Destination Ports VLAN | ||
1/8 | 1 | ||
Total Matching CAM Entries Displayed = 1 |
| ||
|
|
|
|
show cam vlan
User level: user, privileged, supervisor
Use the show cam vlan command to display the MAC addresses learned on a specific VLAN. The MAC addresses are displayed with their destination module and port number.
MACs associated with LAGs appear under the LAG ID, not under the LAG port.
132 | Avaya |