Avaya P330-ML-ML manual Show internal buffering modnum, P330-Nshow internal buffering

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

show internal buffering [<mod_num>]

mod_num	Switch number. If you do not specify a number then
	the internal buffering for all switches in the stack will
	be displayed.
Example:

P330-N>show internal buffering 1

Module Internal Buffer

------ ---------------

1med

show ip access-group

User level: privileged, supervisor.

Use the show ip access-groupcommand to display the active policy-list number.

This command applies to the P334T-ML only when it is in device mode "Layer2".

The syntax for this command is:

show ip access-group <policy-list-number>

policy- A valid id number for a policy list currently defined for the module. list-

number

Example:

P330-1(super)#show ip access group 1011

access-group 101

show ip access-list details

User level: user, privileged, supervisor

This command applies to the P334T-ML only when it is in device mode "Layer2".

Use the show ip access-lists details command to view complete data of a policy list (including DSCP and composite operation tables).

Avaya P330-ML Reference Guide 139