Avaya P330-ML-ML manual P330-N#set logging server, Set logging server access-level

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-N#set logging server 149.49.38.22

Done!

set logging server access-level

User level: privileged, supervisor.

Use the set logging server access-levelcommand to define the access level associated with Syslog server sink. The user cannot specify an access level higher than the level assigned to him.

You need to define a logging server using the set logging server command before you can set the server access level.

The syntax for this command is:

set logging server access-level < admission-level >

<ip-address>

admission-	The access level associated with the Syslog server sink.
level	Possible values are:
	•	read-only
	•	read-write
	•	admin
ip-address	The IP address of the Syslog server.

Example:

P330-N#set logging server access-level read-only 149.49.38.22

Done!

set logging server condition

User level: privileged, supervisor.

Use the set logging server condition command to define a filter rule for logging messages to the Syslog server.

You need to define a logging server using the set logging server command before you can set the server condition.

76 Avaya P330-ML Reference Guide