Avaya P330-ML-ML manual Traceroute, Router-Ntraceroute

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

The syntax for this command is:

terminal {widthlength} [<characters>]

Example:

Router-N>terminal width 80

terminal width: 80

traceroute

User level: user, privileged, supervisor

Use the traceroute command to initiate a traceroute to a remote host.

The syntax for this command is:

traceroute <host>

host IP address.

Example:

Router-N>traceroute 192.168.50.13

validate-group

User level: privileged, supervisor.

Use the validate-groupcommand to verify that all the rules in a policy list are valid.

If there is a configuration problem with a specific rule, or with a number of rules, detailed error messages will be given.

The syntax for this command is:

validate-group<policy-list-number>[quiet]

quiet does not display error messages

Example:

Router-1(configure)# validate-group 101

List 101 is valid

272 Avaya P330-ML Reference Guide