Avaya P330-ML-ML manual Router-Nconfigure# set vlan 2 name vlan2

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

set vlan

User level: privileged, supervisor.

If you are at the ”privileged” level, you can only access this command in Configure mode.

Type configure at the command prompt to enter Configure mode if necessary.

Use the set vlan command to create a router Layer 2 interface.

The syntax for this command is:

set vlan <vlan-id> name <vlan-name>

vlan-id	VLAN number
vlan-name	VLAN name
Example:

Router-N(configure)# set vlan 2 name vlan2

If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

show copy status

User level: user, privileged, supervisor

Use the show copy status command to show the status of the local configuration copy operation.

The syntax for this command is:

show copy status

Example:

Router-N>show copy status

Module #1
===========
Module	:	1
Source file	:	.router-startup

Destination file : .router-running

Host	: -
Running state	: Idle
Failure display	: (null)
Last warning	: No-warning

Avaya P330-ML Reference Guide 247