Avaya P330-ML-ML manual Avaya P330-ML Reference Guide 217

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

copy module-config tftp

Use the copy module-config tftp command to upload the switch-level parameters from the current NVRAM running configuration into a file via TFTP.

The syntax for this command is:

copy module-config tftp <filename> <ip> <mod_num>

filename	The file name (full path)
ip	The IP address of the TFTP server
mod-num	The switch number
Example:

P330-N#copy module-config tftp c:\config\switch1.cfg 192.168.49.10 5

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show tftp upload status' command

********************************************************************

*If you are currently running the P330-ML Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

copy running-config scp

Use the copy running-config scp command to upload the current switch-level parameters from the current NVRAM running configuration into a file via SCP.

The syntax for this command is:

copy running-config scp <filename> <ip> <mod_num>

filename	The file name (full path)
ip	The IP address of the SCP server
mod-num	The switch number

Avaya P330-ML Reference Guide 217