Avaya P330-ML-ML manual Show port classification

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

show port classification

User level: user, privileged, supervisor

Use the show port classification command to display a port’s classification.

The syntax for this command is:

show port classification [module/[port]]

module	Number of the switch. If you do not specify a
	number, the ports on all the switches are shown.
port	Number of the port on the module. If you do not
(Optional)	specify a number, all the ports on the module are
	shown.
	You can also specify a range of ports separated by a
	dash, for example, 4/5-13 for ports 5 to 13 on
	module 4.

Example:

P330-N>show port classification 4/8 Port Port Classification

------ ---------------------

4/8 regular

P330-N>show port classification 4/9 Port Port Classification

------ ---------------------

4/9 valuable

Avaya P330-ML Reference Guide 161