Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

snmp-server informs retries <retries-num>timeout <seconds>

retries-numMaximum number of times to resend an inform request.

seconds

Number of seconds to wait for an acknowledgment before

 

resending. The default is 3.

Example:

 

P330-N>snmp-server informs retries 5 timeout 30

Done!

snmp-server remote-user

User level: supervisor

Use the snmp-server remote user command to configure a remote-user as a target for SNMP notifications.

The syntax for this command is:

snmp-serverremote-user<username> <engineID> <groupname>

{v1 v2c v3 } [auth {md5 sha} <auth-password> [priv des56 <priv-password>]]

username

Variable that specifies the name of the SNMP user. The

 

maximum length is 32 bytes.

engineID

The remote SNMP engineID. The SNMP engineID is a 12 byte

 

string represented as hexadecimal numbers separated by the

 

colon character.

 

For example, 00:00:00:81:0a:fe:ff:12:97:33:45:12.

groupname

Variable that specifies the name of the SNMP group. The

 

maximum length is 32 bytes.

v1, v2c, v3

The security model assigned to the user in user to group

 

association.

auth

A keyword signifying that an authentication password is

(Optional)

required.

md5, sha

Keyword that specifies authentication protocol, either

 

HMAC-SHA-96 or MAC-MD5-96.

priv-

The privacy password. Valid lengths are 8 - 64 characters.

password

 

Avaya P330-ML Reference Guide

205

Page 219
Image 219
Avaya P330-ML-ML manual Snmp-server informs retries retries-numtimeout seconds, P330-Nsnmp-server informs retries 5 timeout