Avaya P330-ML-ML manual P330-Ntelnet, Terminal, Router-Nterminal width, Username

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

telnet <ip-address> [<port-number>]

ip-address	The IP address of the remote host.
port-number	The port number over which to open the Telnet connection.
Example:

P330-N>telnet 149.22.38.127

terminal

User level: user, privileged, supervisor

Use the terminal width and terminal length commands to set the width and length of the terminal display in characters.

The syntax for this command is:

terminal {widthlength} [<characters>]

Example:

Router-N>terminal width 80

terminal width: 80

username

User level: supervisor

Adds a local user account.

By default there is only a single user account, named 'root', with password 'root', which access the administrator level. You cannot delete this basic user account, nor can you modify its access level. You can modify its basic password.

The syntax for this command is:

username <name> password <passwd> access-type {read-onlyread- writeadmin}

name	New user name (minimum four characters)
passwd	User’s password (minimum four characters)
access-type	Access type definition - read only, read-write or
	administrator

Avaya P330-ML Reference Guide 209