Avaya P330-ML-ML manual Copy stack-config tftp, P330-N#copy stack-config tftp c\conf.cfg

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-N# copy stack-config scp c:\config\switch1.cfg 192.168.49.10 5

Username: 330user

Password:

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show upload status' command

********************************************************************

*If you are currently running the P330-ML Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

copy stack-config tftp

User level: supervisor

Use the copy stack-config tftp command to upload the stack-level parameters from the current NVRAM running configuration into a file via TFTP.

Create the file into which you wish to upload the stack-level parameters prior to executing this command.

The syntax for this command is:

copy stack-config tftp <filename> <ip>

filename	The file name (full path)
ip	The IP address of the TFTP server
Example:

P330-N#copy stack-config tftp c:\conf.cfg 192.168.49.10

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time. For more information , use 'upload status' command

********************************************************************

*If you are currently running the P330-ML Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

Avaya P330-ML Reference Guide 25