Chapter 3 Avaya
User level: privileged, supervisor.
Use the CLI prompt length command to set the length of the command prompt that is displayed.
The syntax for this command is:
full | return the CLI prompt to its full length |
size of the CLI prompt in characters | |
Example: |
|
Router-N> prompt-length 3
~N>
reset
User level: user, privileged, supervisor
Use the reset command to restart an individual switch.
The syntax for this command is:
reset
Example:
This command will force a
Do you want to continue (y/n) [n]? y Connection closed by foreign host.
router ospf
User level: privileged, supervisor.
If you are at the ”privileged” level, you can only access this command in Configure mode.
Type configure at the command prompt to enter interface mode.
Use the router ospf command to enable the OSPF protocol on the system and enter the “router ospf” context.
Use the no router ospf command to disable the OSPF one the system.
240 | Avaya |
