Avaya P330-ML-ML No snmp-server community, P330-N#no snmp-server community, V1 , v2c, Noauth

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

no snmp-server community

User level: supervisor

Use the no snmp-server community command to deny access to the device using community strings.

The syntax for this command is:

no snmp-server community

Example:

P330-N#no snmp-server community

Done!

no snmp-server group

User level: supervisor

Use the no snmp-server group command to remove a specified SNMP group. When a security module is not provided, all instances of the group are removed. If a security model and level are specified, then only corresponding group instance is removed

The syntax for this command is:

no snmp-server group <groupname> {v1 v2c v3 {noauth auth

priv}}
groupname	The name of the SNMP group.
v1, v2c, v3	The security model to remove from the group.
noauth,	Keywords that specifies the type of authentication model
auth, priv	instance to remove from the group.
	•	noauth
	•	auth
	•	priv

Example:

P330-1(super)# no snmp-server group newgroupG v3 noauth

Done!

48 Avaya P330-ML Reference Guide