Avaya P330-ML-ML Router-N#copy tftp stack-config c\config\switch1.cfg, Copy tftp startup-config

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

copy tftp stack-config <filename> <ip>

filename	The file name (full path)
ip	The IP address of the TFTP server
Example (for Windows):

Router-N#copy tftp stack-config c:\config\switch1.cfg 192.168.49.10

Example (for Unix):

Router-N#copy tftp stack-config /folder/switch1.cfg 192.168.49.10

copy tftp startup-config

User level: supervisor

This command applies to the P334T-ML only when it is in “Layer2” device mode.

Use the copy tftp startup-configcommand to download a startup configuration from the saved TFTP file to the Startup Configuration file in the

NVRAM.

Only parameters that differ from the factory default settings for the switch are included in the configuration file. Therefore, it is important to reinitialize the NVRAM to the factory default settings before downloading configuration files to the switch. To reinitialize the NVRAM, run the nvram initialize command.

The syntax for this command is:

copy tftp startup-config <filename> <ip>

filename	Destination file name in the tftp server (full path)
ip	The ip address of the tftp server.

Example (for Windows):

Router-N (super) # copy tftp startup-config c:\P330-

ML\startup.cfg 149.49.100.41

Avaya P330-ML Reference Guide 29