Avaya P330-ML-ML manual Copy tftp startup-config filename ip, Erase startup-config

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

included in the configuration file. Therefore, it is important to reinitialize the NVRAM to the factory default settings before downloading configuration files to the switch. To reinitialize the NVRAM, run the nvram initialize command.

The syntax for this command is:

copy tftp startup-config <filename> <ip>

filename	file name (full path)
ip	The ip address of the host
Example:

Router-N>copy tftp startup-config c:\P330-ML\router1.cfg 192.168.49.10

disconnect ssh

User level: supervisor

Use the disconnect ssh command to disconnect an SSH session.

The syntax for this command is:

disconnect ssh <session-id>

session-id	The SSH session ID. Use the show ssh command to
	learn an SSH session ID.
Example:

P330-ML-2# disconnect ssh 0x508622f0

You are about to close this session - do you want to continue (Y/N)? y

Closing session 0x508622f0

erase startup-config

Use the erase startup-configcommand to clear the startup configuration.

The syntax for this command is:

erase startup-config

222 Avaya P330-ML Reference Guide