Using the Configuration Menu (continued)
Home > Wireless
Note: In the Configuration screens that follow, you will be able to configure settings for 802.11a and 802.11g devices in your network. Settings that you input for 802.11g devices will also apply to 802.11b devices in your network.
Wireless
Band- | Select 802.11g or 802.11a from the pulldown menu. |
SSID- | Service Set Identifier (SSID) is the name designated for a specific wire- |
| less local area network (WLAN). The SSID’s factory default setting is |
| default. The SSID can be easily changed to connect to an existing |
| wireless network or to establish a new wireless network. |
SSID Broadcast-
Channel-
Radio Frequency-
Apply-
Enable or Disable SSID Broadcast. Enabling this feature broadcasts the SSID across the network.
6 is the default channel. All devices on the network must share the same channel.
The radio frequency will remain at 2.437GHz .
Click Apply to save the changes.
12
