Chapter 3 Avaya
Example:
Router-N(configure)# ip access-list-owner 101 admin
Done!
ip bootp-dhcp relay
User level: privileged, supervisor.
If you are at the ”privileged” level, you can only access this command in Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
The ip
The no ip
The default state is disabled.
The syntax for this command is:
[no] ip
Example:
To enable relaying of BOOTP and DHCP requests:
Done!
To disable relaying of bootp and dhcp requests:
Router-N(configure)# no ip bootp-dhcp relay
Done!
Avaya | 233 |
