Avaya P330-ML-ML manual Set port redundancy-intervals, P330-N#set port redundancy-intervals 100

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-N#set port redundancy 1/7 2/12 on red1 uplink: Port 2/12 is redundant to port 1/7.

Port redundancy is active - entry is effective immediately

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

set port redundancy-intervals

User level: privileged, supervisor.

Use the set port redundancy-intervals command to configurs the two time constants that determine redundancy switchover parameters:

•“Min Time-between-switchovers” is the minimum interval between switchover of each pair.

•“Switchback-interval” is the period the primary port link has to be “up” before the system switches back.

If the switchback interval is zero, the system never switches back. If it is one, switchback occurs immediately after the primary port link returns.

The syntax for this command is:

set port redundancy-intervals <min-time-between-switchovers> <switchback-interval> none

min-time-between-switchovers	The minimum time between redundancy
	switchovers for each pair (in milliseconds).
switchback-interval	The period the primary port link has to be
	“up” before the system switches back (in
	milliseconds).
	• If switchback interval is zero, the
	switchback is immediate
none	The system switches back only if the
	secondary link fails.
Example:

P330-N#set port redundancy-intervals 100 20

Avaya P330-ML Reference Guide 99