Avaya P330-ML-ML manual Ip ospf cost, Ip ospf dead-interval, Ip ospf hello-interval

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

ip ospf cost

User level: privileged, supervisor.

Use the ip ospf command to configure interface metric.

Use the no ip ospf cost command to set the cost to its default. The default is 1.

The syntax for this command is:

[no] ip ospf cost <cost>

costinteger

Example:

Router-N(configure-if:marketing) # ip ospf cost 10

Done!

ip ospf dead-interval

User level: privileged, supervisor.

Use the ip ospf dead-intervalcommand to configure the interval before declaring the neighbor as dead.

Use no ospf dead-intervalto set the dead-interval to its default value of 40.

The syntax for this command is:

[no] ip ospf dead-interval <seconds>

seconds Time in seconds (integer value)

Example:

Router-N(configure-if:marketing) # ip ospf dead-interval 15

ip ospf hello-interval

User level: privileged, supervisor.

Use this command to specify the time interval between OSPF hello messages the router sends.

Use no ip ospf hello-intervalto set the hello-interval to its default.

The default is 10.

Avaya P330-ML Reference Guide 279