Chapter 2 Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
set port disable <mod_num>/<port_num>
module | Number of the switch in the stack. |
port | Number of the port on the module. If you do not specify a |
| number, all the ports on the module are disabled. |
| You can also specify a range of ports separated by a dash, for |
| example, |
Example: |
|
P330-N# set port disable 4/1
Port 4/1 disabled.
set port dot1x initialize
User level: supervisor
Use the set port dot1x initialize command to initialize port dot1x.
The syntax for this command is:
set port dot1x initialize <module/port>
module/ | Module and port number |
port | You can also specify a range of ports separated by a dash, for |
| example, |
Example: |
|
P330-1(super)# set port dot1x initialize 2/3
port 1/2 dot1x was initialized
set port dot1x max-req
User level: supervisor
Use the set port dot1x
command to set the maximal number of times the Authenticated Station before the session is
86 | Avaya |