Avaya P330-ML-ML manual Ip netbios-rebroadcast, Ip ospf authentication-key, Key mypass

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

ip netbios-rebroadcast

User level: privileged, supervisor.

Use the ip netbios-rebroadcastcommand to set the NETBIOS rebroadcasts mode on an interface.

Use the no ip netbios-rebroadcastcommand to disable NETBIOS rebroadcasts on an interface.

The syntax for this command is:

[no] ip netbios-rebroadcast [<direction>]

The possible values for direction are:

both	Netbios packets received on the interface rebroadcasted to
	other interfaces and netbios packets received on other
	interfaces are rebroadcasted into this interface. This is the
	default value.
disable	Netbios packets are not rebroadcasted into or out of this
	interface.

Example:

To enable rebroadcasting of netbios packets received by and sent from the interface “marketing”:

Router-N(config-if:marketing)# ip netbios-rebroadcast both

ip ospf authentication-key

User level: privileged, supervisor.

Use the ip ospf authentication-keycommand to configure the interface authentication password.

Use the no ip ospf authentication-keycommand to remove the OSPF password.

The syntax for this command is:

[no] ip ospf authentication-key <key>

key string (up to 8 characters)

Example:

Router-N(configure-if:marketing) # ip ospf authentication-

key my_pass

278 Avaya P330-ML Reference Guide