Avaya P330-ML-ML manual Set queuing scheme, P330-N#set queuing scheme wrr 10

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

set queuing scheme

User level: privileged, supervisor.

This command is applicable to P330-ML-ML switches only.

Use the set queuing scheme command to set the queuing scheme to either strict or weighted round robin and to set the weights.

The syntax for this command is:

set queuing scheme {wrr {H} strict default} [module]

wrr/strict	Sets queuing scheme to weighted round robin, strict, or the default.
/default

HRatio between high and low priority queues. This parameter is only used when the queuing scheme is weighted round robin.

module	The module number to which the queuing scheme applies. If no
	module is specified, the command affects all P330-ML-ML modules
	in the stack.
Examples:

P330-N#set queuing scheme wrr 10 2

Module Queuing Scheme

------ --------------

2 Wrr 10:1

P330-N#set queuing scheme default

Module Queuing Scheme

------ --------------

1Default

2Default

set radius authentication enable/disable

User level: privileged, supervisor.

Enables or disables RADIUS authentication for the P330-ML switch.

Avaya P330-ML Reference Guide 109