![](/images/new-backgrounds/1299949/299949219x1.webp)
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
set port negotiation <module>/<port> {enabledisable}
module | Number of the switch. If you do not specify a number, the ports |
| on all the switches are shown. |
port | Number of the port on the module. |
| You can also specify a range of ports separated by a dash, for |
| example, |
enable | Enable port negotiation protocol |
disable | Disable port negotiation protocol |
Example:
To disable autonegotiation on port 1, module 4:
P330-N# set port negotiation 4/1 disable
Link negotiation protocol disabled on port 4/1.
set port point-to-point admin status
User level: privileged, supervisor.
Use the set port
The syntax for this command is:
set port
module/ | Port identifier |
port |
|
admin | |
status | |
| auto - try to automaticaly detect the connection type of the port |
Example: |
|
P330-N# set port point-to-point admin status 1/1 force-true
port 1/1 point to point admin status is set to
96 | Avaya |