Avaya P330-ML-ML manual P330-Nshow ip access-list-dscp, Show ip access lists

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-N>show ip access-list-dscp 101
Trust configuration is trust-cos
DSCP	Action	Precedence	Name
----	--------------------	----------	------------
0	fwd0	mandatory	DSCP#0
1	fwd0	mandatory	DSCP#1
2	fwd0	mandatory	DSCP#2
3	fwd0	mandatory	DSCP#3
4	fwd0	mandatory	DSCP#4
5	fwd0	mandatory	DSCP#5
6	fwd0	mandatory	DSCP#6
7	fwd0	mandatory	DSCP#7
8	fwd1	mandatory	DSCP#8
9	fwd1	mandatory	DSCP#9
10	fwd1	mandatory	DSCP#10
11	fwd1	mandatory	DSCP#11

show ip access lists

User level: user, privileged, supervisor

Use the show ip access lists command to display all the current policy lists. This command applies to the P334T-ML only, when it is in device mode "Layer2".

The syntax for this command is:

show ip access-lists[<policy-list-number>]

policy-list-number	The policy list number (integer from 100 to 199; 0 is th
	default list).
Example:

Router-N>show ip access-lists

The current policy source is local default List (0) parameters

List Owner : other List 0 is valid

default action for list 0 is permit

Avaya P330-ML Reference Guide 141