Avaya P330-ML-ML manual Show upload status modnum, Router-Nshow upload status, Show username

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

show upload status [<mod_num>]

mod_num	Number of the module. If you do not specify a number, upload
(Optional)	statuses for all modules in the stack are shown.
Example:

Router-N>show upload status 1

Module	: 1
Source file	: stack-config
Destination file : c:\conf.cfg
Host	: 149.49.36.200
Running state	: Executing
Failure display	: (null)
Last warning	: No-warning

show username

User level: supervisor

Use the show username command to display the local user accounts.

The syntax for this command is:
show username
Example:
P330-1(super)# show username
User account	password	access-type
-------------------------------	-------------------------------- --------
root	*****	admin
gkohll	*****	read-only
readwrite	*****	read-write

show utilization

User level: privileged, supervisor.

Use the show utilization command to display CPU utilization statistics for modules in the stack.

Avaya P330-ML Reference Guide 197