Avaya P330-ML-ML manual Copy startup-config scp, Copy startup-config tftp

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

copy startup-config scp

User level: supervisor

Use the copy startup-config scp command to upload the switch-level startup configuration from the active bank into a file via SCP.

The syntax for this command is:

copy startup-config scp <filename> <ip> <mod_num>

filename	The file name (full path)
ip	The IP address of the SCP server
mod-num	The switch number
Example:

P330-N# copy startup-config scp c:\config\switch1.cfg 192.168.49.10 5

Username: 330user

Password:

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show upload status' command

********************************************************************

*If you are currently running the P330-ML Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

copy startup-config tftp

User level: supervisor

This command applies to the P334T-ML only when it is in “Layer2” device mode.

Use the copy startup-config tftp command to download a policy configuration from a TFTP server.

Only parameters that differ from the factory default settings for the switch are included in the configuration file. Therefore, it is important to reinitialize the NVRAM to the factory default settings before downloading configuration files to the switch. To reinitialize the NVRAM, run the nvram initialize command.

26 Avaya P330-ML Reference Guide